The
JTD18G-H5CH (JTD-322) allows users to extract digital HDMI audio signals from an HDMI compliant source to L/R analog out 2CH or digital audio 2CH / 5CH output. The unit supports 4k video resolution at 60Hz, HDR10, and is HDCP 2.2 compliant (Users must use an HDMI 2.0 certified cable to achieve these features)
*Note: Simultaneous audio from L/R Out, Optical Out and HDMI can only be achieved if the source audio signal is set to PCM / Stereo
**Note: This unit does not support ARC function, and will not extract audio if using TV as a source
- Connect the source device (Blu-ray, cable box etc.) in to the HDMI input of the extractor. The “Link” LED will illuminate indicating that an HDMI input signal has been detected
- Connect the display to the HDMI output of the extractor
- Connect the 5V power adapter to the extractor. The “Power” LED will illuminate indicating that the extractor is receiving power
- Connect the audio device to the “L/R” output or “Optical” output port of the audio extractor
- If using the “L/R Out” port, please verify that the EDID switch on the unit is set to “2CH“. Also verify that the audio format from the source is PCM / Stereo
- If using the “Optical Out” port, the EDID switch can be set to either “2CH” or “5CH” depending on audio device’s supported audio formats
J-Tech Digital Support Team
1-888-610-2818
support@jtechdigital.com
